Gemini Drawings Database Tool

Enclosure Drawings

Enclosure water tunnel model

86-GP-0440-0001: Enclosure water tunnel model #1
86-GP-0440-0002: Telescope water tunnel model #1
86-GP-0440-0003: Rear shutter
86-GP-0440-0004: Front shutter
86-GP-0440-0005: Spherical dome section
86-GP-0440-0006: Rear spherical spacer
86-GP-0440-0007: Front spherical spacer
86-GP-0440-0008: Arch girder
86-GP-0440-0009: Cylindrical wall section
86-GP-0440-0010: Dome interface plate
86-GP-0440-0011: Cylindrical dome building
86-GP-0440-0012: Support building
86-GP-0440-0013: Temporary base plate
86-GP-0440-0014: Pier
86-GP-0440-0015: Pivot shaft
86-GP-0440-0016: Rotator nut
86-GP-0440-0017: Center section
86-GP-0440-0018: Main strut
86-GP-0440-0019: Lower top ring
86-GP-0440-0020: Upper top ring
86-GP-0440-0021: Secondary mirror
86-GP-0440-0022: Secondary mirror strut
86-GP-0440-0023: Top end spacer #1
86-GP-0440-0024: Top end spacer #2
86-GP-0440-0025: Mount base
86-GP-0440-0026: Strut #1 (mount)
86-GP-0440-0027: Strut #2 (Mount)
86-GP-0440-0028: Strut #3 (mount)
86-GP-0440-0029: Strut #4 (mount)
86-GP-0440-0030: Strut #5 (mount)
86-GP-0440-0031: Mount top
86-GP-0440-0032: Mount plate
86-GP-0440-0033: Pivot pin
86-GP-0440-0034: Mount base template
86-GP-0440-0035: Support building, optional level
86-GP-0440-0036: Plate interface washer
86-GP-0440-0037: Shutter flanges
86-GP-0440-0038: Centering spacer
86-GP-0440-0039: Roughness elements
86-GP-0440-0040: Louver vents
86-GP-0440-0041: Barr type vents
86-GP-0440-0042: Large access door
86-GP-0440-0043: Model vent configurations

Ruth A. Kneale / web@gemini.edu Created 11-19-2002
Gemini 8m Telescopes Project